OECHSLER sets new standards in the sporting goods market - more comfort, more functionality, fewer components

Project breakdown

Application
Substitution of a conventional multi-component ski goggles frame by a single component one

Why OECHSLER
Development, simulation, and production out of one hand

Material used
TPU

The result
All functions wrapped up in a comfortable and flexible single component frame

OECHSLER enables the additive manufacturing of multi-functional single component solutions, which can fulfill ambivalent material characteristics by part design.

Can you guess how many parts one skiing goggle uses? 13. Isn't this a dramatically high number for such a standard sporting goods article? In our perspective, the multiplicity of parts leads to a higher failure potential during production, higher risk of product failure, and ultimately higher costs. As the winter season began, we rethought this and set new standards which lead to fewer parts, more comfort, and functionality. This whole process took us just about a week – from product design to production.

Simplifying the process

As a partner of innovation, OECHSLER is continuously striving for creative solutions to increase the function, comfort, and production effectiveness of products. The project “skiing goggles” was facing a multitude of challenges: the used PU foam should be replaced by an additively manufactured lattice structure, the number of parts should be minimized to the bare minimum and the wearing comfort increased. To reach this goal the development team used a reverse-engineering approach: This meant dismantling standard skiing goggles to gain a detailed understanding of every single component and its function.

In the first dismounting step the team disassembled the lens swap including the rotatable element for lens removal. This element is necessary in case the lenses need to be changed – either due to weather conditions or simply due to renewal. Of course, this is a basic need new glasses must fulfill. Afterwards, the outer frame, which is held by clips, was dismounted. This uncovered the foam as well as the inner layers of the goggle revealing that the foams are glued together – a production step OECHSLER intends to eliminate. In the last step, the buckets holding the elastic band were removed.  

With fresh insights about the product, OECHSLER started the redesign process. Two options were evaluated: Either create an All-in-One product and eliminate all mounting steps. In this case, OECHSLER would have to reconstruct foams by lattice, reduce the design to one frame by full TPU print, as well as integrate rotatable parts into the TPU printed frame. Or reduce elements so just the foams would be replaced with a 3D-printed lattice.

Additive series production enables to rethink conventional product design and thus being able to produce more efficiently

The challenge

Lattice structured softening component as one single component

As a pioneer of new technologies and striving for innovation OECHSLER aimed to realize option one: The creation of an all-in-one product by eliminating all mounting steps. For this approach the team had to have a deep understanding of the standard goggles to enable a one-component printable solution: the lattice may not be too thin otherwise it could break easily and the kinematics would not be guaranteed. If it were too thick the comfort would be reduced. After dismounting all components, the development team scanned all parts via CT to gain deeper insights into the component dimensions. Afterwards the components have been reconstructed in a vector-based program to generate a suitable print file for the solid and lattice parts. Even though OECHSLER has lots of experience in creating new print files the first attempt is rarely right. The first prints were too stiff so that the handles were not flexible enough. Contrary to the initial assumption, this was not caused by the print file but by the post-processing steps in production. The lattice structure needed a different and more intense cleaning of the lattice structures to remove more of the printing residue. Even though optimizing the print file has been quite fast, the adjustment of the post-processing to increase the flexibility of the lattice structure was challenging.

The Outcome

The additive manufacturing lattice technology enables a variety of comfort and design applications that have not been possible before. Additionally, the rapid development and production process enables a start-to-finish product timeline of around four weeks. The example of the additive manufactured skiing goggles shows the following advantages that can be applied to multiple products as well: 

  • Increased wearing comfort and integrated damping function in case of an accidents
  • Combination of rigid and soft elements in one component
  • Movable joints instead of extra parts like clips
  • Reduction of material variety leading to easier recycling at the end of the product life cycle
  • Reduction of production costs due to the elimination of mounting steps
  • Foam replaced by 3D printed lattice structure: adjustable hardness – the existing multi-layer foams can be replaced

Download use case

PDF Download

Have we sparked your interest?

Let's talk about your ideas - we're ready to support your project.

Case Study

I have taken note of the data protection declaration and agree that the data provided by me will be collected and stored electronically. My data will be used only for the purpose of processing and answering my request. By submitting the contact form I agree to this processing.

Karriere mit OECHSLER

Unser Jobportal für Profis, Einsteiger,
Studenten und Schüler

Cookie-Einstellungen

Wir verwenden Cookies, damit wollen wir unsere Webseite nutzerfreundlicher gestalten und fortlaufend verbessern. Selbstverständlich können Sie selbst entscheiden, welche Kategorien Sie zulassen möchten. Bitte beachten Sie, dass auf Basis Ihrer Einstellungen womöglich nicht mehr alle Funktionalitäten der Seite zur Verfügung stehen.

Notwendig
Statistik
Komfort

Weitere Informationen finden Sie in unseren Datenschutzhinweisen und im Impressum.

Notwendig

Diese Cookies sind für den Betrieb der Seite unbedingt notwendig und ermöglichen beispielsweise sicherheitsrelevante Funktionalitäten.

Statistik

Zur Verbesserung unseres Angebots und unserer Webseite, erfassen wir anonymisierte Daten für Statistiken und Analysen. Mithilfe dieser Cookies können wir beispielsweise die Besucherzahlen und das Seitennutzungsverhalten ermitteln und so unsere Inhalte optimieren.

Komfort

Diese Cookies nutzen wir, um Ihnen optimalen Service auf unserer Webseite zu bieten. Gemeint sind Straßenkarten für die schnelle und einfache Lokalisation unserer Standorte.